Date: Tue, 23 Nov 1999 17:03:59 -0700
From: Geoff Gaines 
Organization: UC Berkeley Space SCiences Laboratory
To: Allison Elliot ,
        "Kenneth R. Brownsberger" ,
        Rob Lampereur ,
        Daniel Blackman 
Subject: Actuator turnon sequence
Status: R

Hi guys,

I have confirmed that the actuators are to be turned on by
1) Setting the Actuator Enable, then
2) Setting Actuator Power On, (Acutator 1 or 2)

There is no danger of failure if the reverse is done,
but the above is the intended and proper sequence.