Materials Previously Review during DCE OPERATE Code Walk-Thru Telecons

OPERATE Code Review: February 1-2 (FA-3 SW - Ball)

• Two Day Code Walk-Thru for OPERATE Code
  1. Thu - Feb 1 : Entire Code Package Review Completed.
  2. Fri - Feb 2 : Cancelled - Review Finished in 1 day.

Tuesday, January 23rd - No Telecon

• Clement, Blackman & Brownsberger at Ball Jan. 22-26 for CS-DCE OPERATE Code Testing

Tuesday, January 16th - 10AM MST (FA3 NE - Ball)

• BOOT Changes
  1. Discuss minor changes to v1.13
     (See BOOT Code Change Notes.)
  2. Discuss DCE CRC Memo (PDF)

• OPERATE TASKS (v.1030)
  1. HV Ramp Task - ACTIVITY_HV_RAMP
  2. Setup for CRP - READ_COUNTERS
  3. Count Rate Protection Task - ACTIVITY_CRP

Tuesday, January 9th - No Telecon

• Clement & Brownsberger at UCB/SSL Jan. 8-12 for DCE OPERATE Code Testing

Tuesday, January 2nd - 10AM MST (FA3 NE - Ball)

• BOOT Code Update
  (Modifications to BOOT v1.12 - See BOOT Code Change Notes.)
  1. Changed - CMD ISR Priority
  2. New - INIT_HARDWARE (Digitizer Defaults)
  3. Fixed - Upload CRC Error Fix
  4. New - Command - LFDRSTA
  5. Updated - SAFE_CONTROLS (STIMS, HV DAQ Values)

• OPERATE TASKS
  1. Current Limit Protection Task - ACTIVITY_ILIM (Completed Review of v1016)

Tuesday, January 19th - Telecon Cancelled

• Cancelled - Too many people either out sick and/or indisposed.

Tuesday, December 12th - No Telecon

• Clement & Brownsberger at UCB/SSL Jan. 11-15 for DCE OPERATE Code Testing

Tuesday, December 5th - 10AM MST (FA3 NE - Ball)

• OPERATE MODE INTERRUPT SERVICE ROUTINES
  1. ISR_PRI_CMD_RECEIVED - line 509 (v1002)
  2. ISR_SEC_CMD_RECEIVED - line 531 (v1002)
  3. ISR_TIMER0 - line 553 (v1002) - Critical Item - Review Carefully!
  4. Unused ISR's (Timer1, Serial, Timer2, PCA)
  5. ISR Support Routines (RXD_READ)
• OPERATE TASKS
  1. Current Limit Protection Task - ACTIVITY_ILIM: line 4225 (v1002)

Tuesday, November 28th - 10AM MST (FA3 NE - Ball)

• Agenda - Overview of DCE OPERATE Code
  1. Contents of Code Package
  2. Overview of BOOT/OPERATE Similarities
  3. Outline of OPERATE Specific Tasks/Functions
  4. Outline of OPERATE Specific Commands

---

Return to COS Instrument Development

Mail comments to Ken.Brownsberger@Colorado.EDU