Materials Previously Review during DCE BOOT Code Walk-Thru Telecons

Agenda for Thursday, October 19th: 10AM - 2:30PM MDT

• All day Review of DCE BOOT Code (v1.04)
  • Continue from where previous days session ended - Done
  • Complete Review of entire Code package. - Done

Agenda for Wednesday, October 18th: 10AM - 4PM MDT

• All day Review of DCE BOOT Code (v1.04)
  • Starting with Tasks called by BOOT_MAIN_EXECUTIVE - Done

Agenda for Tuesday, October 10th - 10:00AM MDT

• BOOT Code Review Process
  1. Discuss options for multi-day Review - Done
  2. Discuss time-table for completing BOOT Code - Done
• BOOT Main Routine (v.1.02 of Code)
  1. INIT_CRC (Lines: 3189 - 3249) - Done
  2. CLEAR_OLD_CRCS (Lines: 3344 - 3375) - Done
• BOOT Main Executive Routine
  1. BOOT_MAIN_EXECUTIVE (Lines: 865 - 977) - Done

Agenda for Thursday, October 5th - 11:00AM MDT

• BOOT Code Action Items
  1. Report on Closed & Pending AI's - Done
  2. Report on Status of OPEN AI's from the Asignees - Done
  3. Report on Previous DCE FSW AI's that pertain to BOOT - Done

Agenda for Tuesday, October 3rd - 10:00AM MDT

• BOOT Main Routine (v.1.02 of Code)
  1. BOOT_MAIN (Lines: 768 - 862) - Done
  2. DISABLE_DOG (Lines: 2170 - 2186) - Done
  3. ENABLE_DOG - Done
  4. SAFE_CONTROLS (Lines: 2725 - 2754) - Done
  5. INIT_RAM (Lines: 2758 - 2827) - Done
  6. CLEAR_RAM - Done
  7. REPORT_DIAGNOSTIC (Lines: 2924 - 3064) - Done
  8. COPY_PATCHABLE (Lines: 2862 - 2920) - Done
  9. MEM_COPY - Done
• Report from UCB on their timeline for transitioning to BOOT Code v1.02
  1. Status of OPERATE Code updates needed to support new BOOT/OPERATE scheme - (Daniel)
     • Daniel Reports that OPERATE Code supports new BOOT Code architecture.
  2. Status of GSE/Lab modifications required to support new BOOT/OPERATE scheme - (Daniel)
     • Daniel Reports that GSE Environment supports new BOOT Code architecture.

Agenda for Thursday, September 28th - 11:00AM MDT

• No Meeting - DCE BOOT Code Testing at UCB - Done

Agenda for Tuesday, September 26th - 11:00AM MDT

• BOOT Setup and ISR's (v.1.00 of Code)
  1. ALLOCATE INTERNAL 8051 RAM - Done
  2. BOOT-TO-OPERATE ICD - Done
  3. BOOT RESET VECTOR AND INTERRUPT SERVICE ROUTINE VECTORS - Done
  4. BOOT MODE INTERRUPT SERVICE ROUTINES (ISRS) - Done
  5. BOOT-MODE ISR SUPPORT ROUTINES - Done

Agenda for Thursday, September 21st - 11:00AM MDT

• Review BOOT/OPERATE Interface Specification - Done
• Code Package Overview - Done
• Highlight differences from previous design - Done
• Highlight TBD's within the existing code - Done
• Organize Review Schedule for coming week - Done

---

Return to COS Instrument Development

Mail comments to Ken.Brownsberger@Colorado.EDU